Hydrostorm Eco 150V Variable Speed Pump | Energy Efficient Pool Pump (POS)

Waterco Hydrostorm Eco-V150

The Waterco Hydrostorm ECO150V pool pump uses a brushless DC Motor to change between 3 factory speeds; the user can then vary. Also available as a Hydrostorm Eco-V 100.

A pool filtration system does not require a pump’s maximum water flow rate. Your pool’s filtration efficiency improves at lower flow rates. 

Hydrostorm ECO-V150’s Variable 3-speed options Hydrostorm ECO-V150 has 3 factory set speed options ECO (Low), MED & HIGH. The user can adjust each speed setting in 25 RPM increments. The adjustment allows fine-tuning of the pump’s motor speed to perfectly match the flow requirements of the swimming pool, maximising energy savings and minimising pump noise. 

The Hydrostorm ECO-V 150 operates most economically and with the lowest noise level using the ECO (Low) speed option. The Hydrostorm ECO-V 150 has variable speed control, ranging from 1000 to 2850 RPM (revolutions per minute). The pump’s RPM can be viewed on the control panel display.

ECO (Low 1300 RPM): Filtration

99% of the time Most economical speed to operate the pool’s filtration system without any ancillary pool equipment attached to the re-circulation system. E.g., suction cleaners.

Medium (2400 RPM): Automatic pool cleaners

This speed will enable additional pool equipment for pool cleaning functions that require suction cleaners and low-pressure spa jets.

High (2850 RPM): Vacuuming and backwash

1% of the time Power speed selection for use with backwashing granular media filters (e.g., sand filters), manual pool vacuuming, and operating pool equipment with high water pressure requirements. E.g., water features and spa jets.

Features

• Energy Rating of 8 Stars
• Variable brushless DC motor
• Energy savings of up to 82%
• Ultra-quiet operation

 For more information visit Waterco http://www.waterco.com.au

Brochure

Hydrostorm Eco 150V Brochure

Video