Hydrostorm Eco100V Speed Pump

Waterco Hydrostorm ECO-V100 Variable Speed Pool Pump

The Waterco Hydrostorm ECO-V100 variable speed pool pump lets you adjust motor speed to suit pool filtration, cleaning and higher-flow tasks. Its brushless DC motor offers three adjustable factory-set speeds, with fine control from 1000 to 2850 RPM in 25 RPM increments.

Matching pump speed to your swimming pool’s flow requirements helps maximise energy savings and minimise pump noise. Routine filtration does not require maximum pump flow, and lower flow rates can improve filtration efficiency. The pump also provides extra power for the demands of modern swimming pool designs.

Key features

• 8-star energy rating.
• Variable-speed brushless DC motor.
• Energy savings of up to 82%, as stated in the existing product information; actual savings depend on operating conditions.
• Ultra-quiet operation, with the lowest noise level and most economical operation at the ECO setting.
• Three factory-set speeds with fine adjustment in 25 RPM increments.
• Operating range of 1000–2850 RPM, with RPM shown on the control panel display.

Speed settings and applications

• ECO / Low: 1900 RPM. The economical setting for routine filtration without ancillary equipment, such as suction cleaners, attached to the recirculation system. The existing operating guidance describes routine filtration as approximately 99% of use; choose settings to suit your system.
• Medium: 2400 RPM. For automatic suction pool cleaners and low-pressure spa jets.
• High: 2850 RPM. For manual vacuuming, backwashing granular media filters such as sand filters, and equipment requiring higher water pressure, including water features and spa jets. The existing operating guidance describes these higher-power tasks as approximately 1% of use.

Frequently asked questions

Is the Hydrostorm ECO-V100 a variable speed pool pump?

Yes. It has three factory-set speed options, ECO, Medium and High, with additional adjustment from 1000 to 2850 RPM in 25 RPM increments.

Which setting is intended for everyday pool filtration?

The ECO setting, factory-set to 1900 RPM, is intended for routine filtration without ancillary equipment attached. Adjust the operating speed to match your pool system’s flow requirements.

Can it operate a suction cleaner or backwash a sand filter?

The Medium setting is intended for suction cleaners and low-pressure spa jets. The High setting is intended for manual vacuuming, backwashing granular media filters and higher-pressure equipment. Suitability depends on the flow requirements of the connected equipment.

Is another model available?

The range also includes the Hydrostorm ECO-V150.

Manual, brochure and manufacturer information

• Hydrostorm ECO-V100 manual
• Waterco Hydrostorm ECO-V brochure
• Waterco Hydrostorm ECO-V manufacturer information

Product video