Zodiac MX8 / AX10 / MX6 / S10 Tune Up Kit – R0682000

Zodiac MX8 / AX10 / MX6 / S10 Tune Up Kit – R0682000

If your Zodiac MX8, AX10, MX6, or S10 is moving slowly, going in circles, or losing its tracks, it's time for a tune up. The genuine Zodiac Tune Up Kit (R0682000) contains every wear part needed to restore your cleaner to full factory performance — complete with step-by-step illustrated instructions.

Zodiac MX-series cleaners use a gear-driven system to navigate the pool more effectively than traditional suction cleaners. These gears and drive components wear over time — typically after 2–3 years depending on operating speed — and this kit replaces them all in one go.

Compatible Models

• Zodiac MX8 (Generation 2)
• Zodiac AX10
• Zodiac MX6
• Zodiac S10

Kit Contents

• 1 x MX Engine (30027600)
• 2 x MX Drive Shaft (30033700)
• 2 x Bearing (W7230223)
• 1 x Side A Reversing Assembly (11162600)
• 1 x Side B Reversing Assembly (11162700)
• 2 x MX Tracks (A0166100)
• Step-by-step illustrated instructions

Frequently Asked Questions

How do I know if my Zodiac MX8 needs a tune up?
Common signs include the cleaner moving slowly or sluggishly, travelling in circles rather than covering the whole pool, constantly losing its tracks, or failing to climb walls. These symptoms typically indicate worn gears, drive shafts, or reversing assemblies — all of which are replaced by this kit.

How often does the MX8 need a tune up?
Most MX8, AX10, and MX6 cleaners require a tune up every 2–3 years. Running the cleaner at a lower speed (using an MX Flow Regulator) can extend the life of the drive components significantly.

Is this a genuine Zodiac part?
Yes — this is the genuine Zodiac Tune Up Kit (part number R0682000), not an aftermarket copy. We only stock genuine Zodiac/Fluidra parts to ensure correct fit and performance.

Can I install this myself?
Yes — the kit includes step-by-step illustrated instructions. Most pool owners can complete the tune up themselves with basic tools. If you'd prefer, we also offer a repair service — call us on 02 9137 8914 or post your cleaner to us and we'll repair and return it.

Should I use an MX Flow Regulator with my cleaner?
Yes — if your MX8 or AX10 doesn't already have one, we strongly recommend adding an MX Flow Regulator. It controls the operating speed of the cleaner, reducing wear on the drive components and extending the time between tune ups.